User Guide

16
Internet Settings
Generally, you complete the internet sengs by following the quick setup wizard of the RS WiFi App when you set
the mesh nodes at the first me. If your internet connecon type or parameters are changed, you can set them
again here to enable your mesh nodes to access the internet. The mesh nodes support the following four connecon
types.
PPPoE: If this type is selected, you need to enter the PPPoE user name and password provided by your ISP
for internet access.
DHCP: If this type is selected, no parameter is required to enter. The mesh node obtains the dynamic IP
address and other related parameters automacally from your ISP.
Stac IP Address: If this type is selected, you need to enter the stac IP address and other related parameters
provided by your ISP for internet access.
Bridge: If this type is selected, the mesh nodecan access the internet only aer being connected to another
routerwith internet accessibility in wired manner.
The following three connecon types are available only when the language of your mobile device used to setup
is set to Russian or Ukraine.
PPPoE Russia: If this type is selected, you need to enter the PPPoE user name, PPPoE password, service
name, server name, MTU value, and IP address informaon (if any) pro
vided by your ISP for internet access.
PPTP/PPTP Russia: If this type is selected, you need to enter the IP address, user name and password of the
PPTP server, MTU value, and IP address informaon (if any) provided by your ISP for internet access.
L2TP/L2TP Russia: If this type is selected, you need to enter the IP address, user name and password of the
L2TP server, MTU value, and IP address informaon (if any) provided by your ISP for internet access.
If you set the Connecon Type to Bridge, the Guest Network, Parental Control, Port Forwarding, UPnP,
DNS, QoS, and DHCP server funcons becomes unavailable.
TIP