Instructions

7
Check Rockler.com for updates. If you have further
questions, please contact our Technical Support
Department at 1-800-260-9663 or
[e-mail]
The LED indicator
light will be red while the battery is
charging and go off when the battery
is fully charged.
1. Charge the speaker by plugging the
small end of the included USB cord into
the micro-USB port on the control unit
and the other end into a power source.
2. Once the battery is charged, disconnect
the USB cord. Make sure Bluetooth
®
connectivity is enabled on your device.
3. Turn on the unit by pressing and holding
the ???? button on the control unit for
three seconds. The blue LED will blink.
4. When you open your device, “My BT
Speaker3” should appear onscreen.
Select it and wait for the connection
to be established. Once a connection
is established, the blue LED on the
control unit will light up, the display
will show “BLUE,” and you will
hear a tone.
Connecting to Your Device
Fig. 4 - Top view
Fig. 3 - Back view (Back panel removed for clarity
Speakers
Speakers
Top of
enclosure