Cov lus qhia

7
Check Rockler.com for updates. If you have further questions, please
contact our Technical Support Department at 1-800-260-9663
or [e-mail]
Mounting a Drill Press Table
Method 1:
Drive woodscrews with FastCap Wood Washers (49034,
sold separately) or fender washers through holes in your
drill press’ metal table to secure. Fig. 1.
Method 2:
Install 5/16"-18 Screw-On Tee Nuts (68379, sold
separately) on the underside of your shop-built table and
use Hold-Down Clamps (35283, sold seaprately) to secure.
Fig. 2.
Fig. 2
Fig. 1