User's Manual

REMOTE ENGINE CONTROL

REMOTE ENGINE STARTING - UNSUCCESSFUL START

In the event that the engine does not start on the first attempt, the system shuts down for a few seconds and

then attempts to restart the engine a 2

and 3

time. For hard starting engines, the unit will allow a starter

crank time of up to 4 seconds maximum. This should provide ample cranking time for difficult starts, but is

limited to 4 seconds to help prevent damage to the starter from over cranking. If Third attempt fails to start

engine, the system will turn off and doors will remain locked. NO FURTHER ATTEMPTS WILL BE MADE

AUTOMATICALLY

TURNING OFF A REMOTE STARTED ENGINE:

1) Engine is running in Remote Start (Parking lights ON).

2) Press and hold the remote start button for 2 seconds..

3) Engine & parking lights OFF, Doors re-lock.

ENTERING YOUR REMOTE STARTED VEHICLE:

1) With engine running, unlock system with remote (If equipped) or open door with key.

2) Enter vehicle and be careful not to step on brake pedal! (Remote Start Reset)

3) Turn Ignition to ON/RUN position, then press brake pedal to reset the Remote Starter & Shift out of park.

4) Remote starter will reset instantly when the brake is pressed. Parking lights will turn off and the ignition key

is now controlling your vehicle.

IDLE DOWN MODE:

This mode allows the unit to take over operation of the parked vehicle while the ignition key is removed and

you exit the vehicle. The vehicle will remain running for the programmed time or until canceled. The Run Time

choices are: 10, 20, 30 minutes or Infinity Run. Default = 20 minutes

Examples:

• You pull up to a convenience store for a quick stop, "Idle Down" mode keeps engine running when you exit

the vehicle, (with keys in hand). When you return, turn ignition ON, step on brake and drive away.