User's Manual

STATUS LED

VEHICLE STATUS LED : Located on Window Antenna

The Status led will flash when the doors are locked. It will turn off when the doors are unlocked. The LED will

remain solid when the system is in Valet Service mode. The remote start function WILL NOT operate when in

Valet Mode.

REMOTE ENGINE CONTROL

REMOTE ENGINE STARTING - SUCCESSFUL START:

1) Press the remote start button for at least 2 seconds. Parking lights flash once, return solid, and the

Ignition/Acc circuits turn on. The remote control will beep and the LED will flash once to confirm.

2) After a few seconds the Starter Motor engages. The parking lights and Acc circuits will turn off while

cranking.

3) Engine Starts and Runs. Parking Lights and Acc turns back on, and the doors lock.

4) Engine will remain running for programmed run time until reset with Brake pedal. If needed, the engine can

be turned off with remote transmitter by pressing and releasing the Start button.

AFTER

IGN

STARTER

THEN

FLASH 1X

SOLID

SEC.

PRESS START