User's Manual

3
USING THE REMOTE TRANSMITTER
BASIC REMOTE OPERATION
The transmitter supplied with this system is a single button 2-Way remote control. This is a multifunction
remote control. It can operate power door locks (if equipped with power locks) and Remote Start the vehicle.
The 2-Way Remote Control will confirm operation with Beeps and LED flash for lock, unlock and remote start.
1. Press Once = Lock or Unlock.
a. Lock = 1 beep & 1 green LED flash.
b. Unlock = 2 beeps & 2 green LED flashes.
2. Press 3 times within 2 seconds = Panic Mode – 30 second cycle (2 second beep and green LED).
3. Press and Hold 2 seconds = Remote Start or Remote Stop.
a. Remote Start = 1 beep, red & green LED flash once.
b. Engine Running = 4 beeps, red & green LED flash 4 times.
c. Start Fail = 2 beeps & 2 red flashes.
d. Engine Stop/Shut Down = 1 beep & 1 red LED flash.
2
-
W
ay
Remote
Red & Green LED
1
-
W
ay
Remote
Blue LED