User's Manual

1. Turn Ignition Key to the ON position.

2. Press Programming button 4 times, then after a few seconds the unit flashes the parking lights 4 times.

3. Press the start button of the first transmitter. You should get 1 light flash confirming the remote is coded,

then press the start button of a second transmitter, the unit will flash 2 times confirming the remote is coded

and so on. If all 3 codes are learned, the unit will automatically exit code learning mode, otherwise turn key

off. See diagram below.

IGN

OFF

WAIT FOR

4 FLASHES

PRESS 4X's

FLASH 1, 2, or 3 X's

IGN

OFF

PRESS START BUTTON

NO FACTORY KEYLESS ENTRY AFTER REMOTE START

Most new cars Do Not allow the factory Remote Keyless Entry to function with the Ignition ON. This means

you can’t use the factory remote to lock or unlock the doors. After remote start you have to use the keys to