Owner's Manual

11
Installation
Step 13 - Connect to Battery
Once you have wire harness secured, connect the power and
ground to the battery terminals.
NOTE: If you have a 2 seater, the wire harness will need to be
bundled up and tie wrapped. Do not cut the harness. There is
enough clearance with the extra wire length.
Step 14- Rear Speaker Connectors
This kit is designed to work with Rockford Fosgate’s RFRZ-RSW16
rear speaker wire kit. If you are using the kit, you will route the
under the rear access panel. If you are not using the kit, simply
wire tie the harness out of the way of moving parts or heat.
Step 15 - Reassmble Vehicle
Once everything is secure, reassemble the vehicle. You will need to
leave the top dash panel off so you can adjust the amplfiers. Once
the system is tuned, install the top dash panel and hood.