Owner's Manual

9
Installation
NOTE: Due to the weight of the enclosure and subwoofer, an
additional person to help is recommended.
Once all of the hardware is in place, tighten all of the brackets
down to the enclosure first, then to the chassis.
Step 12 - Install Glove Box Door
After all of the brackets are tight and secure, the glove box door
will need to be installed onto the enclosure. Insert the door stud
towards the passenger side retainer first, then insert the stud on the
passenger side.
NOTE: The glove box latch mount that is pre installed on the
enclosure is designed to work with 2015 and newer model latching
systems. If you have a 2014 model, you will need to install the
latch adapter onto the pre installed latch mount using the two
supplied screws.