Owner's Manual

7
Place the subwoofer into the enclosure and line up the predrilled
holes in the enclosure with the subwoofer’s mounting holes.
NOTE: If you subwoofer mounting holes do not line up, predrilling
holes is suggested before screwing subwoofer to enclosure.
NOTE: When installing your subwoofer be sure to check for
interference with the subwoofer and the inside of the enclosure.
A spacer ring is included in the kit if you have a subwoofer that is
touching the enclosure.
Install the subwoofer grille that was provided with your woofer.
Step 8 - Install Steering Column Bracket
You will need to loosen the two nuts that are located above the
steering column. One of the subwoofer enclosure brackets will be
mounted in this location. It is not necessary to completely remove
the nuts.
Slide the bracket between the nuts and the column support. Do not
tighten yet.
NOTE: All of the brackets being installed should only be hand
tightened. Leaving all of the fasteners loose will make installation
process easier.
Installation