Owner's Manual

4
Contents
Installation Tools
The following is a list of suggested tools needed for installation:
Installation Considerations
This section focuses on some considerations for installing your Polaris
RZR dash kit. This manual will illustrate the installation process with a
2014 Polaris RZR XP4 1000.
If you feel unsure about installing this system yourself, have it installed by
a qualified technician.
Before installation, disconnect the battery neg-
ative (-) terminal to prevent damage to the unit,
fire and/or possible injury.
Before beginning any installation, follow these
simple rules:
• Be sure to carefully read and understand the instructions before
attempting to install this motorcycle audio kit.
• Consult your UTV’s service manual for model specific information.
Models may differ from year to year depending on factory options and
aftermarket accessories added.
• This dash kit is specifically designed to work with Rockford Fosgate’s
PMX series compact digital media receivers.
• With the addition of an amplifier or source unit, be sure that your
current charging system is in proper working order.
• Visit rockfordfosgate.com for more comprehensive installation
videos and product information.
• Torx - T40
• Pry Tool or Small Flat Blade
Screw Driver
• Dash Kit
• Allen Wrench
• (2) Shoulder Head Bolts
• (2) Speed Clips
• (4) Mounting Screws
• Installaton Guide
Installation
2014 and up RZR® XP/XP4 1000
2016 and up RZR® XP/XP4 Turbo
*2015 and up RZR® XP/XP4 900
* Must purchase storage pocket from Polaris® for a 2014 and
up RZR® XP/XP4 1000 to utilize this dash kit on 2015 and up
RZR® XP/XP4 900 models.
Step 1 - Remove Hood
To begin with, rotate the mounting clips to remove the hood.
Step 2 - Remove the Instrument Panel
Once the hood is removed, you can now access the bolts holding
in the instrument panel that mounts on top of the dash. Using a
Torx screwdriver, remove the two bolts holding the panel in place.