Owner's Manual

3
Installation
Contents
Installation Tools
The following is a list of suggested tools needed for installation:
Installation Considerations
This section focuses on some considerations for installing your
Polaris
®
RZR
®
Rear Speaker Wire Harnesses. This manual will
illustrate the installation process with a 2016 Polaris RZR XP4
Turbo.
If you feel unsure about installing this system yourself, have it
installed by a qualified technician.
Before installation, disconnect the battery
negative (-) terminal to prevent damage to
the unit, fire and/or possible injury.
Before beginning any installation, follow
these simple rules:
• Be sure to carefully read and understand the instructions before
attempting to install this rear speaker wire kit.
• Consult your UTV’s service manual for model specific
information. Models may differ from year to year depending on
factory options and aftermarket accessories added.
• This dash kit is specifically designed to work with Rockford
Fosgate’s Element Ready wake can speaker enclosures.
• With the addition of an amplifier or source unit, be sure that your
current charging system is in proper working order.
• Visit rockfordfosgate.com for more comprehensive
installation videos and product information.
• Security Torx (supplied with
Wake Cans)
• Allen Wrench
• Wire Cutters
• (2) Rear Speaker Wire
Harnesses
• Plastic Wire Tie Wraps
Applicable Models:
2014 and up RZR
®
XP/XP4 1000
2016 and up RZR
®
XP/XP4 Turbo
2015 and up RZR
®
S/ XC / 4 900
This rear speaker wire kit is designed to work with Rockford
Fosgate’s RFRZ-PMXWH1 and RFRZ-K4D wire kits. The wire
harnesses plug directly into PM21652W-MB and RM1652W-MB
wake tower speaker enclosures.
NOTE: Installation will be shown on passenger side of vehicle for
the purpose of the installation guide. The driver’s side wire harness
mounts in a similar manner.