Owner's Manual

4
Design Features
Rotary Encoder
This knob is for adjusting main volume, zone volumes,
menu navigation and setting adjustments.
REV / FWD button
Use this button to skip back and forward
through channels or tracks with a short press.
Long pressing will activate manual seek mode.
MENU button
This button gives you access to the main
settings of the unit by long pressing. Short
pressing will give you access to the settings for
the active source.
DIMMER button
Pressing this button will allow you to select
between the two brightness values for the
display.
PLAY / PAUSE button
Press this button to play or pause your music.
This button also acts as a MUTE when the
source is in AUX & TUNER mode.
SRC (Power) Button
This button allows you to switch between
sources (short press) and power the unit ON
and OFF (long press).
SUB Buttons
These buttons allow you to adjust the
subwoofer output or rear line out UP or DOWN
(0-20).