Owner's Manual

QUICK SETUP
RZR STAGE 3/4 AMPLIFIER SETTINGS
Tech Support Phone Number: 800-669-9899
http://www.rockfordfosgate.com/support/rftech.aspx
ROCKFORD TECHNICAL SUPPORT
Selectable 2/4 Channel Switch must
be set to 2 CH for this application.
Variable FRONT gain setting need to
be at 9 for this application.
Variable CROSSOVER FREQ. setting
needs to be positioned toward the
“z” in Hz for this application.
Variable GAIN setting needs to be
positioned toward the “7” in this
application.
Variable REAR gain setting need to
be at 9 for this application.
Selectable CROSSOVER switches
gain setting need to be set to HP for
this application.
The HIGH/LOW LEVEL switch needs to
be set to LOW. This means the switch is
extended out all of the way.