Owner's Manual

6
Next remove the bolts and plastic retaining clips. Use a small flat
blade screwdriver to pry the plug out of the retainer so it can be
removed.
Next, remove the rear console if equipped (4 seater).
Step 5 -Routing Wire Harness
Now that the center console is out of the way, take the wire harness
and place it through the fire wall.
Remove the existing rubber grommet in the fire wall and cut along
the score lines to open it up for the wire harness.
Place the grommet over the wire harness.
Insert the wire harness in through the opening on the fire wall and
lock the grommet in place.
Installation