Owner's Manual

4
Contents
Installation Tools
The following is a list of suggested tools needed for installation:
Installation Considerations
This section focuses on some considerations for installing your Polaris
®
RZR
®
Front Speaker Pod Enclosures. This manual will illustrate the
installation process with a 2016 Polaris RZR XP4 Turbo.
If you feel unsure about installing this system yourself, have it installed by
a qualified technician.
Before installation, disconnect the battery neg-
ative (-) terminal to prevent damage to the unit,
fire and/or possible injury.
Before beginning any installation, follow these
simple rules:
• Be sure to carefully read and understand the instructions before
attempting to install this enclosure kit.
• Consult your UTV’s service manual for model specific information.
Models may differ from year to year depending on factory options and
aftermarket accessories added.
• This dash kit is specifically designed to work with Rockford Fosgate’s
Element Ready 6.5” speakers.
• With the addition of an amplifier or source unit, be sure that your
current charging system is in proper working order.
• Visit rockfordfosgate.com for more comprehensive installation
videos and product information.
• Ratchet
• 15mm Socket
• 13mm Socket
• 5/32” Allen Wrench
• (1) Passenger Side Front
Speaker Enclosure
• (1) Driver Side Front Speaker
Enclosure
• (2) Foam Tape
• (2) Threaded Studs
• (4) Mounting Screws w/
Washers
• (2) Mounting Bolts w/ Washers
• Installation Guide
Installation
Applicable Models:
2014 and up RZR
®
XP/XP4 1000
2016 and up RZR
®
XP/XP4 Turbo
2015 and up RZR
®
S/ XC / 4 900