Owner's Manual

Installation Considerations
This section focuses on some considerations for installing your Polaris
RANGER amplifier installation kit. This kit is desigend to work in
conjuction with Rockford's other
RANGER specific audio kits and part s.
If you feel unsure about installing this system yourself, have it installed
by a qualifi
ed technician.
When drilling holes, make sure
what is on the other side. Be sure that
any electrical, fuel lines or any other important components are free
and clear from
the area.
~WARNING
A CAUTION
A CAUTION
Before installation, disconnect the battery
negati
ve( -) terminal to prevent damag e to
the unit, fire and/or possible injury.
Before beg
inning any in stallation, follow
these simple rules:
Be sure to carefully read and understand t he
instructions before atte
mpting to install th is
wiring kit.
• Cons
ult your UTV's service manual for mode l specific informatio n.
Models may differ from y ea r to y ea r depending on factory options
and aftermarket accessori
es added.
This amplifier installation kit
is specifically designed to work w it h
Rockford Fosgat
e's compa ct chassis amp lifiers.
With the addition of an amplifier or source unit, be sure that your
current charging
sys tem is in proper working orde r.
• Visit rockfordfosgate.com for mor e comp rehensive product
inf ormation.
• Visit
our YouTube channel for comprehensi ve installation videos
demonstrating complete installation guid
es and install tips.
NEED HELP WITH YOUR INSTALLATION?
@
ViOUTUBEVISITOURCHANNELFORACOMPLETE
I
1
INSTALLATION VIDEO AND OTHER TIPS
WWW.YOUTUBE.COMIUSERJROCKFORDFOSGATE
Installation
Applicable Models:
Full Size Polaris RANGER 900/1000/900 Crew/1000 Crew
This amplifier installation kit is desi gn ed to work wi th Rockfo rd
Fo sgate's R AN GER specific enclosu res and dash kits. The amp kit can be
installed in both Crew and non-crew
mode ls under the dash above the
steering colum
n.
Step 1. Remove the top dash pane l.
Step 2. Lo osen th e (2) nut s on the steering column support using a 15
mm wrench and socket.
N
OTE : Yo u do not need to completely remove the nuts.
Step 3. To mou nt the bracket, line up the (2) notch es on the bracket
and slide them over the
bo lts that we re ju st loosened. The tab
f
aces towa rd outside of the vehicle.
Step
4. Plug the input, ou tput and pow er/ground harnesses int o th e
amplifier before attaching to th e br ac ket.
Step 5. Mo u nt the amp lifier to the bracket using the (2) su pplied
screws.
Step 6.
Co nnect the pow er and ground to the battery terminals.
Step 7. Conne ct input connector (s ) from the radio.
3