Owner's Manual

8
Step 2 - Speaker Removal
After the fairing is removed, unplug the wires from both speaker
terminals. Remove the screws that secure the factory speaker and
grille to the fairing.
Remove each speaker and grille from the fairing.
NOTE: Be sure to keep track of the wires that are plugged into the
clutch and brake side speakers.
Step 3 - Speaker Installation
Insert the new Rockford speaker and grille assembly into the fairing
opening with the wire terminals facing up. Use the included screws
to securely mount the speakers to the fairing.
Installation
Front Speakers for Ultra Classic
®
, Electra Glide
®
,
Street Glide
®
and Tri Glide
®
models.
Step 1 - Fairing Removal
To begin with, remove the top screws below the windshield to
remove the windshield.
Once you have the windshield set aside, remove the remaining
screws on the inside of the fairing. This will allow you to remove
the front fairing.
You will need to disconnect the harness from the headlight to
completely take the fairing off of the motorcycle.