Owner's Manual

575CP8PI
Rockford Fosgate CP8Pi Amplifier Wiring Kit 8 gauge Power
General Overview: This is a single amplifier wiring kit that includes the power and
ground cables, patch cable, turn-on lead and accessories required to install one amplifier.
Speaker wire is sold separately.
Power High Performance Series Power/Ground Cable: The power and ground cable
feature 735 strands of braided copper wire. The power wire has a red translucent jacket
and the ground wire has a translucent black jacket.
In-line Fuse Holder: The included in-line fuse holder attached to the power cable comes
with a 40-amp AGU-type fuse. For mounting, the fuse holder snaps into the supplied
mounting base, which has two mounting holes (mounting screws not supplied). The fuse
holder has the following dimensions: L=3.248", W=1.538", H=1.196".
Interconnect Cable: The supplied RF Twister interconnect cable uses spiral shield inter-
conductors made of tinned, pure crystal, oxygen-free copper in a side-by-side
configuration. It features a translucent clear virgin PVC outer jacket covering a tinned
silver cosmetic over-braid with translucent virgin PVC molded connectors and gold-
plated tips.