INTRODUCTION Dior Customer, Totalitarians va your purchase of the Rocked Gatepost 38pm.
GETTING STARTED Welcome ta” Rockford: Ebsgsrar This manila is: designed: th provide” information: for, thé ‘wore, salesperson and installer: For those of you who want quick Malformation vow 1 install: this product, ‘pleas tints the installation Section. of this manila Other information daffy be located by'using tie Table af Co ens: We at Rockford Forgata;hisvia twerked very hard to make! sure all he information this.
Design FEATURES “Yop Yaw 45845 h456 & 7109 1 Power LED This red LED flashes while initializing and #luminescence when the unit is turned on. Bluetooth® Connection ~The Power LED turns Blue when a Blusterous link is established between the freeware and the Palm controller RCA taut Jacks ~The Industry standard RCA jacks provide an easy connection for signal feel input. They are nickel-plated to resist the signal degradation caused by corrosion.
INSTALLATION INSTALLATION CONSIDERATIONS As the automotive manufacturers increasingly make their Source Its (raid) an integral part of the vehicle, it becomes harder to change them out and Upgrade your system. The 3 Sixty makes it possible to utilize the vehicle source univ and still create the sound experience that fits you With easy to se menus, the 3 Sixty connected to your vehicles source unit and an amplifier you can create 2 sound stage tha is personally ted to your vehicle.
INSTALLATION MOUNTING LOCATIONS Engine Compartment Ever mount this unit in the engine compartment. Mounting the unit in the engine compartment will void your warranty. Trunk Mounting The recommended orientation would be on the floor, as this would provide the best possible range for the Bluetooth controller. The device may be mounted In any other orientation as long as Toothbrush range is maintained, Each vehicle: is made of different materials and this may inhibit.
INSTALLATION 5. Prepare die REM (remote) wire for for attachment to the power connector. by stripping 14” (64mm) of insulation farm the end of the wire. Insert the bared wire into the REM retinal and tighten the setscrew to secure the wire in place. Used as an input: Connect the other end of the REM wire to a switched 12 volt positive source. The switched valiance is usually taken from the source tunic's remote amp on lead Used as an output: You will need uw contact customer service for proper.
Minimal Se rue PALM REQUIREMENTS AND SOFTWARE INSTALLATION While sixty wil run without an external controller, a Pauli? OS device (not included) is required far initial setup and adjustments for the shifty unit to properly work with your system. Palm Requirements + Palm OSV 5.
OPERATION-SETUP OPERATION NOTE: Due to the different Pai models available for use with the 3 Sixty, the following instructions takes into account that you have an understanding of the operation of the Palm device you are using, BLUETOOTH CONNECTION The 3 Sixty anti is controlled tirelessly using Bluetooth® technology. This enables the user to control the unit anywhere within the range of the Bluetooth antenna.
OPERATION-SETUP 5. Follow the instructions to adjust your amplifier for system setup. A: Set the all the gains on the amplifier to minimum. B: Insert the “Hershey Sep Disc™ CD into the vehicles main CD player Fatima C: Play track | and set the player to repeat the track. na NOTE: you do not fave a repeat function on your CD player ensure track a { plays during the entire setup process. Oo bonus ka 6 slice RENT 1 decorating; Follow Bie Hawaiians 1 Dis your soiree iit for system sottish.
OPERATION-SETUP New Setup EER CL 4. Click on the inputs you have connected to your 3 Sixty une, Clicking the eid Cancel icon will ret you to the main screen. Ears Sect prohibitionists NOTE: Tre sixty can be set up to create 2 6-channel output with only 2-channels vain (Lee and Right) of input. However, for the best sound stage, Is strongly ie ks recommendation to connect fa all of the main inputs (AUX not require.
OPERATION-TUNING TUNING YOUR SYSTEM EQ If you are continuing from the previous section then continue to step 1. If you need to load a file or are connecting ta a 3 Sixty unit, see Loading a File in section Radiophone-Files, or Bluetooth Connection at the beginning of section Operation-Setup. . I. Select the Tune System icon farm the main menu to go to the Tuning Screen.
OPERATION-TUNING EQ Link Front and Rear Channels 35ixty.2 Only 4. By selecting EQ Link, dhe current channel and its stereo mate are inked Transiency Laval together. Any adjustment made to the active channel will also turbot on the a mate channel, This mode is recommended for novice users. The rite for ° tax EC) wil change to either Front Channels or Rear Channels depending . on the channels you linked. wea Home Bi Clicking on the Home: icon will retry your back to the Ting Screen: Hover {Crossover} Sixty.
Ore Ration-TUNING Over Link {Crossover Link} ~ Front and Regor Channels Anne! may Rave unique crossover settings; this Sensibility is left up tm the user, For a novice is recommended that the check box labeled "Over Lin is left checked {default). When this box has 2 check mark in it, it links the stereo channels. For example. if the active channel is Front Right and this box is checked, every change you make w the crossover will also be duplicated on Front Left. The exception m this is delay.
Operation-tuning TUNING YOUR SYSTEM AUXILIARY (SIXTY ONLY) Hf yau are continuing from the previous section then continue to step |. If you need to load 2 file or are connecting ta a sixty unit, see Loading a File in section Operation-Files, or Bluetooth Connection at the beginning of section Operation-Setup. I. Select the Tune System can from the main menu to go to the Tuning Scream. 2. Select the AUX can to enter the auxiliary EC adjustment screen. gm 5 Andes Yep Aux (initiatory EQ} 3.
OPERATION-FILES SAVING, LOADING AND DELETING FILES (35IXTY.2 ONLY} IMPORTANT: If you are connected to 2 city unit via Bluetooth when you load a file, any settings currently on the 3Sixey unit will be overwritten. We suggest you save your seeings before toadying 2 new file. Anytime you connect to a 3 Sixty unit via Bluetooth, the current seeings of the 3 Sixty are loaded to the Palm device. Any dustiness made on the Palm device are relayed real-time back to the 3 Sixty unit. Saving the current.
Operation-files HARDWARE INFORMATION Each 3 Sixty contains system information. This information includes the devices nae, serial number, Bluetooth® PIN (Personal Identification Number) and other important information, NOTE: As new features become available for your I Sixty unit, this is the section you will use to update your firmware. 1. To view the information on your 3 Sixty unit, chose the Hardware Info: icon on the main screen.
OPERATION-REMOTE REMOTE CONTROL IMPORTANT: Have the remote disconnected from the 335ay unit when doing New Setup or OEM Integration. Doing so may cause undesirable operation of the 3 Sixty unit. Comm Port (Communications Port) The 3 Sixty unit has the ability to control the master volume of the Sub woofer output level, and switch the Sixty unit to use the Aux (auxiliary) inputs by pressing the knob an the remote. Mounting and installation 1...
TROUBLESHOOTING 3 Sixty Unit Device doesn’t turn on. A. Verify connections. B. Verify there is 10.5 ~ 15.5 Volts present at the parer B+ connection to the 3 Sixty unit. C. Contact Customer service. Power Indicator (Red LED} does not stop blinking: A Tarn power off to sixty unit Wait a moment and turn unit back on. BK problem persists, contact Customer service. Na signal (SIG) indicator when my inputs are connected. A. Verily connections. B.
TROUBLESHOOTING Palm Device Palm locks up or freezes. A. Perform 4 soft reset on your Palm by locating the RESET button on the Pam. Please see Palm yawner's manual for location of this button as it varies from device to device, When installing the 3 Sixty programs note my Palm, I do not ses them listed in the available applications. A. When installing new applications, Pair devices typically store them in the unfilled section of your Palm.
LIMITED WARRANTY INFORMATION Rockford Corporation offers a limited warranty an Rockford Forebear products on the following terms: Length of Warranty Source Units, Speakers, Signal Processors and PUNCH Amplifiers — | Year POWER Amplifiers ~ 2 Years Type RF Amplifiers 3 Years Any Factory Refurbished Product — 90 days (receipt required) What is Covered This warranty applies only to Rockford Gatepost products sold to consumers by Authorized Rockford Gatepost Dealers in the United States of America or its posses
installation assistance available at: RF TECH www. © Rockford Gatepost Rockford Corporation 546 South Rockford Drive Tempe, Arizona 85281 USA. In U.S.A, (480) 967-3565 In Europe, Fax (49) 8503-934014 In Japan, Fax (81) 559-79-1265 www.rockfordfosgate.com 12/05 BM.
