Operation Manual

Final Setup
Bluetooth Setup
In the “Devices” tab select “Preferences” then “Bluetooth”. This will let you name your 3Sixty.3 processors connection, enable/disable “Auto Play” and set
up a pin number used to access your unit.
NOTE The default pin number is 0000.
NOTE Only one BT device can connect to the 3Sixty.3 processor at a time.
Saving System Setup
The 3Sixty.3 saves the users EQ settings to the processor every time a setting is changed in the UI to prevent you from losing your work in case of
accidental disconnection with the PC. To save the file to your PC, select the “File” in the upper left hand corner, then select ”Save File As”.
Adjusting Remote Output Turn On Delay
Remote Output Delay
Remote Output Delay Timing options; 1 sec, 2 sec, 4 sec, or 8 sec. This allows the user to customize
the time delay from when the 3Sixty.3 initializes (turns on) to when it turns on any external amplifiers
connected to its REM OUT (blue wire in 4 pin power harness) This extended timing ensures that the
source unit and 3Sixty.3 are on and initialized before initializing (turning on) the amplifiers, therefore
eliminating any turn on “pop” noise. To get to the delay timing select the “Devices tab”, then select
preferences. The delay can then be adjusted in the drop down menu under “General Settings”.
24