Manual

20
Is this your first Rocketboost product?
YES - If this is your first Rocketboost enabled product, you can skip
this section because your wireless sender/receiver and speaker were
previously joined or connected at the factory. To learn how to use
your speakers, see “Listening to music” on page 23.
Note: If you do need to rejoin the wireless sender/receiver and the wireless speaker, see
“Joining the wireless sender/receiver to the wireless speaker” below.
NO - If this is not your first Rocketboost enabled product, proceed to
“Joining the wireless sender/receiver and wireless speaker to an
existing Rocketboost network” on page 22.
Joining the wireless sender/receiver to the wireless speaker
The wireless sender/receiver and the wireless speaker must be
“joined” or wirelessly connected to each other, so that audio can be
sent from the wireless sender/receiver to the speaker.
Note: Use this procedure only if you need to rejoin the wireless sender/receiver and
wireless speaker and this is your only Rocketboost-enabled product.
To join the wireless sender/receiver to the wireless speaker:
1 Set the HUB switch on the wireless sender/receiver to ENABLE if this is your
first Rocketboost product set.
• The power indicators turn green when the HUB switch is set to ENABLE.
• The power indicators turn blue when the HUB switch is set to DISABLE.
Wireless speaker
Wireless sender/receiver
(HUB: ENABLE)
RF-RBWSO1_11-0202_MAN_V1.fm Page 20 Monday, May 2, 2011 11:46 AM