User guide

16
Specifications
Sender
Receiver
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Audio Input: Stereo, speaker-level • Maximum audio input signal: 10 V RMS into
6.6 Kohms
Audio Output: Wireless • Stereo, 16-bit, 48 KHz uncompressed
• Bit-rate: 1.465 Mbps
• Raw wireless bit-rate: 2 Mbps
Supply voltage •5V
Transition Delay • 15-20 ms
Audio Input: Wireless • Stereo, 16-bit, 48 KHz, uncompressed
• Wireless audio system performance
• Signal-to-Noise Ratio: 87 dB
• Total harmonic distortion: 0.4% (at 1 KHz, Output
2V RMS
Audio Output: High Efficiency Class D,
Speaker-level
• Supports 4 to 16 ohm speakers
• Audio output power: 2 × 25 W (RMS) into 4 ohms
(no more than 10% THD)
High Efficiency Class D Output
Transition Delay • 15-20 ms
Power Supply • AC 120 V ~ 60 Hz
Power Consumption •15 W