User Manual
Table Of Contents
- Contents
- Introduction
- IMPORTANT SAFETY INSTRUCTIONS
- Specifications
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back
- STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs
- STEP 4 - Determine wall-mount location
- STEP 5 - Option 1: Installing on a wood stud wall
- STEP 5 - Option 2: Installing on a solid concrete or concrete block wall
- STEP 6 - Attach your TV to the wall mount
- STEP 7 - Adjusting the tilt angle
- Removing the TV from the wall mount
- LIFETIME LIMITED WARRANTY
5
Need help? Call 1-800-620-2790 (U.S. and Canada)
RF-TVMLPT03V3
TV hardware bag
Lbl Hardware Qty Lbl Hardware Qty
E4M4
F4N4
G4O4
H4P4
I4Q4
J4R4
K4S4
L4T4
M4 × 12 mm
screw
M8 × 16 mm
screw
M4 × 35 mm
screw
M8 × 20 mm
screw
M4 washer
M8 × 25 mm screw
M6/M8 washer
M8 × 35 mm screw
22 mm spacer
M8 × 45 mm screw
2.5 mm spacer
M8 × 50 mm screw
M6 × 12 mm
screw
Lag bolt washer
M6 × 35 mm
screw
5/16" × 2 3/4" lag bolt