User Manual
Table Of Contents
- Contents
- Introduction
- IMPORTANT SAFETY INSTRUCTIONS
- Specifications
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back
- STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs
- STEP 4 - Determine wall-mount location
- STEP 5 - Option 1: Installing on a wood stud wall
- STEP 5 - Option 2: Installing on a solid concrete or concrete block wall
- STEP 6 - Attach your TV to the wall mount
- STEP 7 - Adjusting the tilt angle
- Removing the TV from the wall mount
- LIFETIME LIMITED WARRANTY
18
Need help? Call 1-800-620-2790 (U.S. and Canada)
STEP 7 - Adjusting the tilt angle
1 Adjust the swivel tension by hand or by using a 3/16" hex key (not included), then adjust
the tilt angle by gripping the top and bottom of the TV and manually moving the TV to
the angle you want. When you are done adjusting the tilt tension, retighten the knob, but
do not over-tighten. Tighten the swivel tension after the adjustments have been made.
2 Adjust the level by loosening and tightening the screws on the tops of the vertical
brackets.
You’ll need
Phillips screwdriver
Level
10° 5°