User Manual
Table Of Contents
- Contents
- Introduction
- IMPORTANT SAFETY INSTRUCTIONS
- Specifications
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back
- STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs
- STEP 4 - Determine wall-mount location
- STEP 5 - Option 1: Installing on a wood stud wall
- STEP 5 - Option 2: Installing on a solid concrete or concrete block wall
- STEP 6 - Attach your TV to the wall mount
- STEP 7 - Adjusting the tilt angle
- Removing the TV from the wall mount
- LIFETIME LIMITED WARRANTY
17
Need help? Call 1-800-620-2790 (U.S. and Canada)
RF-TVMLPT03V3
STEP 6 - Attach your TV to the wall mount
• Holding the TV with the top of the screen tilted toward the wall, slide the upper notches
of the right and left TV brackets (B and C) over the upper lip of the wall plate (A). Then,
gently lower the TV until the lock engages the lower lip of the wall plate (A). You will
hear a click when the TV locks into place.
Tip: If you are mounting a very large TV (over 65”), you may want to consider
connecting the cables to the TV before mounting it on the wall, as the ports might be
difficult to reach after it is mounted.
and
HEAVY! You will
need assistance
with this step.