User Manual
Table Of Contents
- Contents
- Introduction
- IMPORTANT SAFETY INSTRUCTIONS
- Specifications
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back
- STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs
- STEP 4 - Determine wall-mount location
- STEP 5 - Option 1: Installing on a wood stud wall
- STEP 5 - Option 2: Installing on a solid concrete or concrete block wall
- STEP 6 - Attach your TV to the wall mount
- STEP 7 - Adjusting the tilt angle
- Removing the TV from the wall mount
- LIFETIME LIMITED WARRANTY
11
Need help? Call 1-800-620-2790 (U.S. and Canada)
RF-TVMLPT03V3
STEP 4 - Determine wall-mount location
The center of your TV will match the center of the wall plate (A). Before you drill holes in the
wall:
1 Measure the distance from the bottom of your TV to the middle (half of the height of the
TV). This is measurement a.
2 Measure the distance from the floor to where you want the bottom of the TV to be placed
on the wall. Keep in mind that the bottom of the TV should be placed above any furniture
(such as entertainment centers or TV stands). The TV should also be above items placed
on top of the furniture (like a Blu-ray player or cable box). This is measurement b.
3Add a + b. The total measurement is the height where you want the center of the TV
bracket to be on the wall.
You’ll need
Notes:
• For more detailed information on determining where to drill your holes, visit our
online height-finder at:
http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder
• Your TV should be high enough so your eyes are level with the middle of the screen.
Normally, 40 to 60 inches from the ground.
Measuring tape
Pencil