User guide

9
RF-RBAUX
Sender/receiver (front panel)
# Feature Description
1
Power/Join
button
Press to turn the sender/receiver on. Press and hold to initiate joining. Press
again to go to standby mode. When you connect the AC power adapter, the
device turns on automatically.
2
Power/Join
indicator
Lights blue when the HUB STATUS switch is set to DISABLE.
Lights green when the HUB STATUS switch is set to ENABLE.
The indicator will turn solid when it is joined in a network, if the device is not in
a network, the indicator blinks slowly. When the device is put in joining mode,
the indicator blinks rapidly.
3
Standby indicator Turns red when the sender/receiver is in standby mode.
4
Remote control
sensor window
Receives the signal from the remote control.
5
Source Press to select different audio streams on your Rocketboost network. Each press
moves to the next source.
6
Receiver mode
indicator
Turns blue when receiving audio from a Rocketboost sender. Blinks slowly if the
current source listened to is muted.
Note: This indicator will not be lit if the Rocketboost sender is turned off. Press
the SOURCE button to find the next available source.
7
Sender mode
indicator
Turns blue when sending audio.
Note: This indicator will light automatically when a 3.5 mm connector is
attached to the device (the device senses the cable connection).
TM
1
2
3
4
5
6
7
RF-RBAUX_10-1202_MAN_V4.fm Page 9 Thursday, October 21, 2010 8:34 AM