User guide

20
Connecting power to the sender/receiver
To connect the power:
1 Connect the AC power adapter to the sender/receiver and plug into
an AC power outlet. The sender/receiver automatically turns on
and the power indicator turns green or blue, depending on the hub
status switch position.
Notes:
- Make sure that the AC power outlet matches the sender/receiver’s AC
input (100-240V) before connecting.
- Connect the AC power adapter to an AC power outlet only after all
other connections are completed.
Using your sender/receiver
Turning on your sender/receiver
To turn the sender/receiver on and off:
1 When initially connecting to an AC outlet, the device automatically
turns on. To turn off the device, press . The power indicator turns
off and the standby indicator turns red.
2 If the sender/receiver is off, press to turn it on. The power
indicator lights.
RF-RBAUX_10-1202_MAN_V4.fm Page 20 Thursday, October 21, 2010 8:34 AM