User's Manual

RF-MAB2 Bluetooth Stereo Headset

Turning the headset on or off

To turn on the headset:

• Press and hold (Talk) for about three seconds. The LED flashes blue.

Note: If you press and hold (Talk) for six seconds, the headset goes into pairing

mode. For more information, see “Pairing the headset” on page 6.

To turn off the headset:

• Press and hold (Talk) for about three seconds. The LED turns red,

dims, then turns off.

Pairing the headset

Cell phone or MP3 player

To pair the headset with a cell phone or MP3 player:

1 With the headset turned off, press and hold (Talk) until the LED

blinks blue and red rapidly, indicating pairing mode is activated (this

typically takes three to six seconds).

2 On the phone or MP3 player when paring mode is activated, select

RF-MAB2 from the list of discovered devices, then enter the password 0000

(four zeros) to pair the headset. For instructions, see the device's

documentation.

Note: After the headset has been successfully paired with the cell phone or MP3 player,

the headset connects automatically to the phone or MP3 player the next time the

headset is turned on near the phone or player.

Computer running Windows 7

Note: Before you pair the headset with the computer, make sure that the computer is

equipped with a Bluetooth radio. Refer to the computer’s documentation or contact

the computer manufacturer for more information. If you do not have a Bluetooth

radio, install a Bluetooth USB adapter (dongle).

To pair the headset in Windows 7:

1 Turn on Bluetooth on the computer. For instructions, see the computer’s

documentation or contact the computer manufacturer.

2 Double-click the Bluetooth icon in the system tray, near the clock.

3 Click Add a device.

4 With the headset turned off, press and hold (Talk) until the LED

blinks blue and red rapidly, indicating pairing mode is activated (this

typically takes three to six seconds).

RF-MAB2_13-0117_MAN_V4_ENG.fm Page 6 Tuesday, May 7, 2013 9:08 AM