RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 1 Friday, June 3, 2016 2:41 PM 19” to 39” TV WALL MOUNT - TILT RF-HTVMTAB For wood-stud and concrete wall installations Safety information and specifications ......................2 Tools needed......................................................................2 Package contents .............................................................3 Installation instructions .................................................
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 2 Friday, June 3, 2016 2:41 PM Safety information and specifications IMPORTANT Maximum TV weight: 50 lbs. (22.6 kg) SAFETY INSTRUCTIONS Screen size: 19" to 39" diagonal - SAVE THESE Overall dimensions (H × W × D): INSTRUCTIONS 8.8 x 9.16 x 1.5 in. (225.3 x 232.7 x 39.1 mm) CAUTION: Do not use this product for any purpose not Wall-mount weight: 1.2 lbs. (0.54 kg) explicitly specified by We’re here for you Rocketfish. www.rocketfishproducts.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 3 Friday, June 3, 2016 2:41 PM RF-HTVMTAB Package contents Make sure that you have all the hardware necessary to assemble your new TV wall mount: 1 TV Bracket (1) 12 Wall plate (1) 11 Template (1) Need help? Call 1-800-620-2790 (U.S.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 4 Friday, June 3, 2016 2:41 PM TV Hardware Lbl Hardware Qty. Lbl M4 × 12 mm screw 2 3 4 4 M6 × 12 mm screw 4 M8 × 20 mm screw 4 M4 × 35 mm screw 5 7 Qty. M4 washers 8 4 9 M6/M8 washers 4 10 Universal spacers 4 4 M6 × 35 mm screw 6 Hardware 13 4 2 5/16" × 2 3/4" lag bolt 4 M8 × 35 mm screw Concrete Installation Kit CMK1 (not included) Contact customer service at 1-800-359-5520 to have these additional parts shipped directly to you.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 5 Friday, June 3, 2016 2:41 PM RF-HTVMTAB Installation instructions STEP 1 - Measure your TV hole pattern and assemble the TV bracket 1 Measure the width and height of your TV hole pattern in centimeters to determine which TV bracket configuration fits your TV. W es inch H cm 2 3 Record your measurements in cm: Width ______cm x Height ______cm. inches cm mm 3 7.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 6 Friday, June 3, 2016 2:41 PM 20 cm 10 cm 7.5 cm 7.5 x 7.5 cm 10 x 10 cm 20 x 10 cm Remove extender brackets 10 cm 7.5 cm 3/8 in. (10mm) wrench 20 x 20 cm Leave extender brackets on 03 20 cm 20 cm 6 Need help? Call 1-800-620-2790 (U.S.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 7 Friday, June 3, 2016 2:41 PM RF-HTVMTAB Step 2 - Determine whether your TV has a flat back or an irregular or obstructed back 1 2 3 4 5 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for instructions. Temporarily lay the TV bracket (1) on the back of your TV.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 8 Friday, June 3, 2016 2:41 PM STEP 3 - Select screws, washers, and spacers 1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware included. (If there are screws that came with the TV, they are almost always in the holes on the back of the TV.) If you don't know the correct length of the mounting screws your TV requires, test various sizes by hand threading the screws.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 9 Friday, June 3, 2016 2:41 PM RF-HTVMTAB STEP 4 - Option 1: Attaching the mounting hardware to TVs with a flat back 1 2 3 Align the holes you noted on the TV bracket (1) with the screw holes on the back of your TV. Make sure the bracket is level. Place the washers (8 or 9) over the holes in the TV brackets that align with the screw holes on the back of your TV, then insert the screws (2, 3, or 4) through the washers.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 10 Friday, June 3, 2016 2:41 PM STEP 4 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs 1 2 3 Place the spacers (10) over the screw holes on the back of the TV. Align the TV bracket (1) over the spacers (10), then place the washers (8 or 9) over the holes in the TV bracket and insert the screws (5, 6, or 7) through the washers, TV bracket, and spacers. Make sure the bracket is level.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 11 Friday, June 3, 2016 2:41 PM RF-HTVMTAB STEP 5 - Determine wall-mount location • • NOTE: For more detailed information on determining where to drill your holes, visit our online height-finder at: http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder Your TV should be high enough so your eyes are level with the middle of the screen. Normally, 40 to 60 inches from the ground. The center of your TV will match the center of the wall plate (12).
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 12 Friday, June 3, 2016 2:41 PM STEP 6 - Option 1: Installing on a wood stud wall 1 2 3 Note: Drywall covering the wall must not exceed 5/8" (16 mm). Locate the stud. Verify the center of the stud with an edge-to-edge stud finder. Align the center of the wall plate template (11) at the height you determined in the previous step and make sure that it is level.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 13 Friday, June 3, 2016 2:41 PM RF-HTVMTAB NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting the wall plate until it is level. Tighten the bottom lag bolt when the adjustments are complete. You’ll need Lag bolt 13 (2) Level Pencil Edge-to edge stud finder 7/32" wood drill bit Wall plate (12) Tape Drill Template (11) 1/2" socket wrench Need help? Call 1-800-620-2790 (U.S.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 14 Friday, June 3, 2016 2:41 PM STEP 6 - Option 2: Installing on a solid concrete or concrete block wall CAUTION: To prevent property damage or personal injury, never drill into mortar between blocks. Mount the wall plate directly onto the concrete surface. Note: Minimum solid concrete thickness: 8 in (203 mm). Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm).
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 15 Friday, June 3, 2016 2:41 PM RF-HTVMTAB C2 C1 C2 C1 NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting the wall plate until it is level. Tighten the bottom lag bolt when the adjustments are complete. You’ll need Level Wall plate (12) Template (11) Drill 1/2" socket wrench Hammer Concrete anchor C2 (2) Lag bolt C1 (2) 3/8" masonry drill bit Pencil Need help? Call 1-800-620-2790 (U.S.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 16 Friday, June 3, 2016 2:41 PM STEP 7 - Attach your TV to the wall plate • Hang the TV onto the wall plate (12) by hooking both slots in the TV bracket (1) onto the wall plate, then lowering the TV until it clicks into place. HEAVY! You will need assistance with this step. 16 Need help? Call 1-800-620-2790 (U.S.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 17 Friday, June 3, 2016 2:41 PM RF-HTVMTAB STEP 8 - Making adjustments • Loosen the tilt tension knob on the TV bracket to adjust the tilt of your TV. Tighten the knob when your TV is set to the tilt you want. Tilt tension knob Tilt adjustment Tighten Loosen Need help? Call 1-800-620-2790 (U.S.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 18 Friday, June 3, 2016 2:41 PM Removing the TV from the wall mount 1 2 To remove your TV from the wall plate (12), disconnect all cables, then pull down on the release latch. Swing the bottom of the TV out from the wall bracket, then lift the assembly off the wall bracket. IMPORTANT: Your TV is heavy. You may need assistance with this step. Release latch For customer service, call: 1-800-620-2790 (U.S. and Canada) 18 Need help? Call 1-800-620-2790 (U.S.
RF-HTVMTAB_16-0417_MAN_V2_ENG.fm Page 20 Friday, June 3, 2016 2:41 PM Part # 6907-002109 01 www.rocketfishproducts.com (800) 620-2790 (U.S. and Canada) ROCKETFISH is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2016 Best Buy. All rights reserved.
