User Manual
Table Of Contents
- Contents
- Introduction
- Specifications
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attaching the horizontal brackets to a TV with a flat back
- STEP 3 - Option 2: Attaching the horizontal brackets to a TV with irregular or obstructed back
- STEP 4 - Attaching the vertical bracket
- STEP 5 - Determine wall-mount location
- STEP 6 - Option 1: Installing on a wood stud wall
- STEP 6 - Option 2: Installing on a solid concrete or concrete block wall
- STEP 7 - Attach the arm assembly to the wall plate
- STEP 8 - Attach your TV to the arm assembly
- STEP 9 - Managing cables
- STEP 10 - Adjust tilt
- STEP 10 - Adjust the level
- Removing your TV from the wall mount
- LIFETIME LIMITED WARRANTY
8
Need help? Call 1-800-620-2790 (U.S. and Canada)
• Obstructed back: The brackets block any of the jacks on the back of your TV.
You need 2.5 mm or 22 mm spacers (
03) when assembling the wall mount.
• Irregularly-shaped back: There is a gap between the brackets and some part
of the back of your TV. You need 2.5 mm or 22 mm spacers (
03) when
assembling the wall mount.
6 Remove the brackets.