User Manual
Table Of Contents
- Contents
- Introduction
- Specifications
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attaching the horizontal brackets to a TV with a flat back
- STEP 3 - Option 2: Attaching the horizontal brackets to a TV with irregular or obstructed back
- STEP 4 - Attaching the vertical bracket
- STEP 5 - Determine wall-mount location
- STEP 6 - Option 1: Installing on a wood stud wall
- STEP 6 - Option 2: Installing on a solid concrete or concrete block wall
- STEP 7 - Attach the arm assembly to the wall plate
- STEP 8 - Attach your TV to the arm assembly
- STEP 9 - Managing cables
- STEP 10 - Adjust tilt
- STEP 10 - Adjust the level
- Removing your TV from the wall mount
- LIFETIME LIMITED WARRANTY
6
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV Hardware
Lbl. Hardware # Lbl. Hardware #
01
4
03
4
4
4
4
06
4
4
09
4
4
10
4
4
12
1
02 4
13
2
14
1
M6 × 12 mm screw
Spacer (2.5 mm)
M6 × 35
mm screw
Spacer (22 mm)
M8 × 16 mm
screw
M5 × 10 mm TV
interface screw
M8 × 25 mm
screw
Lag screw 5/16 × 2 3/4 in.
M8 × 35 mm screw
Washer 5/16 in.
M8 × 50 mm screw
Locking screw
10-32 × 3/8 in.
M6/M8 washer
Wall plate screw
10-24 × 1 1/4 in.
5/32 in. hex key