User Manual
Table Of Contents
- Contents
- Introduction
- Specifications
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attaching the horizontal brackets to a TV with a flat back
- STEP 3 - Option 2: Attaching the horizontal brackets to a TV with irregular or obstructed back
- STEP 4 - Attaching the vertical bracket
- STEP 5 - Determine wall-mount location
- STEP 6 - Option 1: Installing on a wood stud wall
- STEP 6 - Option 2: Installing on a solid concrete or concrete block wall
- STEP 7 - Attach the arm assembly to the wall plate
- STEP 8 - Attach your TV to the arm assembly
- STEP 9 - Managing cables
- STEP 10 - Adjust tilt
- STEP 10 - Adjust the level
- Removing your TV from the wall mount
- LIFETIME LIMITED WARRANTY
13
Need help? Call 1-800-620-2790 (U.S. and Canada)
RF-HTLF23
STEP 5 - Determine wall-mount location
Note:
Your TV should be high enough so your eyes are level with the middle of the screen from a seated
position (normally, 40 to 60 inches from the ground).
For more detailed information on determining where to drill your holes, visit our online height-finder
at: http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder
The center of your TV will match the center of the wall plate (08). Before you drill
holes in the wall:
1 Measure the distance from the bottom of your TV to the middle of the four
mounting screw holes. This is measurement a.
2 Measure the distance from the floor to where you want the bottom of your TV to
be placed on the wall. Keep in mind that the bottom of your TV should be placed
above any furniture (such as entertainment centers or TV stands). Your TV should
also be above items placed on top of the furniture (like a Blu-ray player or cable
box). This is measurement b.
3Add a + b. The total measurement is the height where you want the center of the
wall plate (
08) to be on the wall.
4 Use a pencil to mark this spot on the wall.
You’ll need
A
B
a
b
Measuring tape
Pencil