User Manual
Table Of Contents
- Contents
- Introduction
- Specifications
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attaching the horizontal brackets to a TV with a flat back
- STEP 3 - Option 2: Attaching the horizontal brackets to a TV with irregular or obstructed back
- STEP 4 - Attaching the vertical bracket
- STEP 5 - Determine wall-mount location
- STEP 6 - Option 1: Installing on a wood stud wall
- STEP 6 - Option 2: Installing on a solid concrete or concrete block wall
- STEP 7 - Attach the arm assembly to the wall plate
- STEP 8 - Attach your TV to the arm assembly
- STEP 9 - Managing cables
- STEP 10 - Adjust tilt
- STEP 10 - Adjust the level
- Removing your TV from the wall mount
- LIFETIME LIMITED WARRANTY
10
Need help? Call 1-800-620-2790 (U.S. and Canada)
STEP 3 - Option 1: Attaching the horizontal brackets to a
TV with a flat back
CAUTION: To avoid personal injury or property damage, do not use power tools.
1 Align the holes you noted on the horizontal brackets (04) with the screw holes
on the back of your TV.
2 Place the washers (
02) over the holes in the brackets that align with the screw
holes on the back of your TV, then insert the screws that you selected in
STEP 2 (
01) through the washers. Make sure that the brackets are level.
3 Tighten the screws until they are snug against the brackets. Do not over tighten.
You’ll need
4
2
1
02
Washer
(4)
01 Screws (4)
OR
04 Horizontal
brackets (2)
OR
OR OR
Phillips screwdriver
Level