Quick Start Guide

ManualsBrandsRocketfish ManualsA/V Cables & Connectors4-Port 4K HDMI Switch Box - Black

HDMI input

Input LEDs/

buttons

Power LED/

button

1234

INPUT 1

Power

port

HDMI

output

HDMI

inputs

INPUT 4OUTPUT INPUT 3 INPUT 2

DC5V

POWER

ON/OFF

SELECT

MODES

RF-G1501

Power

Input selectors

3 To select a source device:

• Press the number on your remote that matches the input of the

source device you want.

• Tap the number on your switch that matches the input

your source device is connected to.

The corresponding input LED lights.

4 Use your source device as usual to play video and audio.

5 When nished, press and hold (power) to turn o your switch.

Note: You may leave the power on while not in use.

Before using your new product, please read these instructions to prevent any damage.

QUICK SETUP GUIDE

RF-G1501 / RF-G1501-C, 4-Port HDMI Switch with 4K Compatibility

REMOTEFRONT

BACK

PACKAGE CONTENTS

• 4-Port HDMI Switch • Remote control

• Power adapter • Quick Setup Guide

FEATURES

Your 4-Port HDMI Switch supports 4K video and next-generation

audio.

• Compatibility with most CEC-enabled HDMI devices

• Resolution – 480p, 720p, 1080p, and 4K (4096 × 2160)

• Frame Rate – Up to 4k at 60 Hz (1080p at 120 Hz)*

• Color – Deep Color, HDR, and other enhanced color specications

HDMI

Input 1

HDMI

Input 3

Power

adapter

HDMI

Output

HDMI

Input 4

Blu-ray

Satellite

Receiver

4K UltraHD

DVD

Player

Game

Console

HDMI

Input 2

• Audio – Works with Dolby TrueHD, DTS-HD, and all audio formats

supported by the HDMI 2.0 standard

• Auto Switch – When a source device is turned on, the switch

automatically detects and switches to that device’s input

*Note: TVs with high internal refresh rates (such as 240 Hz) are compatible.

The specications refer to source signal and not TV refresh rate.

SETTING UP YOUR HDMI SWITCH

1 Connect HDMI cables from your source devices to the switch’s

INPUT ports.

2 Connect an HDMI cable from your TV (or projector) to the

switch’s OUTPUT port.

3 Connect the power adapter from the DC 5V port to a power

outlet.

The power LED and an input LED light up.

Note: To fully support 4K resolution, connect the input and output

channels using HDMI PREMIUM Certied cables (within 3 meters).

Optional wall-mounting: Install two screws 4 in. (10.2 cm) apart into your

wall, then hang the switch on the screws. Mounting hardware is not included.

USING YOUR HDMI SWITCH

1 Turn on your TV and source device.

2 To turn on your switch press POWER ON/OFF on your remote

control or tap the (power) symbol on your switch.

Note: When the switch is turned on, it automatically switches to the last

input that was used.

Summary of content (2 pages)

PAGE 1
QUICK SETUP GUIDE RF-G1501 / RF-G1501-C, 4-Port HDMI Switch with 4K Compatibility FRONT INPUT 1 1 2 3 • Audio – Works with Dolby TrueHD, DTS-HD, and all audio formats supported by the HDMI 2.0 standard • Auto Switch – When a source device is turned on, the switch automatically detects and switches to that device’s input REMOTE Power LED/ button Input LEDs/ buttons HDMI input Power 4 POWER ON/OFF *Note: TVs with high internal refresh rates (such as 240 Hz) are compatible.
PAGE 2
SETTING UP THE AUTO SWITCH FUNCTION Note: The auto switch function setting is on by default. • You can turn the auto switch function off or back on by pressing and holding the POWER button on the front panel for three seconds while the switch is turned off. • The LEDs on the front panel flash twice to indicate that the auto switch function is turned off. • The LEDs on the front panel turn on for two seconds to indicate that the auto switch is turned on.