User guide

6
Transmitter
Front panel
# Item Description
1 Source indicators Light to show which input source is selected.
2 Sync indicator If this indicator is off, the HD Extender Transmitter and
Receiver have not established a connection. When they are
connected, the indicator will blink according to the quality
of the connection: as the connection quality improves, the
indicator will blink slower. When the quality of the
connection is perfect, the indicator stays on (non-blinking).
Note: The Sync indicator will always be active to show the power
line sync state, regardless of whether the Transmitter is turned on
or not.
3 Power indicator Lights green to indicate that the power is turned on. Turns
red in standby mode.
4 Source selector
button
Press to toggle between input sources.
5 Power button Press to turn the Transmitter on. Press again to go into
standby mode.
RF-HPL302_14-0333_MAN_V1_ENG.fm Page 6 Tuesday, April 22, 2014 2:39 PM