User Manual

9
Need help? Call 1-800-620-2790 (U.S. and Canada) or
01-800-926-3010 (Mexico)
RF-HSWM1A18 / RF-HSWM1A18W / RF-HSWM1A18-C / RF-HSWM1A18W-C
3 Install two anchors (H) into the holes making sure that they are flush with the
drywall.
4 Install the wall plate with the two wall plate screws.
If needed, you can make small level adjustments to the wall plate, by loosening
the bottom screw and shifting the wall plate until it is level. Tighten the bottom
screw when adjustments are complete.
CAUTION
Avoid potential personal injury or property damage!
Overtightening could reduce the holding power of the
screws. DO NOT over-tighten the screws.
You’ll need
Pencil
Drill
1/4” (6.5 mm)
drywall drill bit
(H) Anchors
(2)
Phillips screwdriver
(F) Wall plate screw
(C) Wall plate
Hammer
RF-HSWM1A18(-C)_HSWM1A18W(-C)_17-0678_MAN_V3_ENG.fm Page 9 Monday, August 21, 2017 9:39 AM