Quick Start Guide

RocketM Series Quick Start Guide

https://dl.ui.com/qsg/RocketM-Series/RocketM-Series_EN.html[1/3/2020 10:46:37 AM]

Ethernet LED

Signal LEDs

LAN

Reset Button

The Ethernet LED will light steady green when an active Ethernet connection is made and

flash when there is activity.

In airOS®, you can modify the wireless signal strength threshold values for each LED on the

Advanced tab under Signal LED Thresholds. The default values are shown below:

The 10/100 Ethernet port is used to connect the power and should be connected to the

LAN and DHCP server.

To reset to factory defaults, press and hold the Reset button for more than 10 seconds

while the device is already powered on.

Hardware Installation

The Rocket is designed to mount directly onto a Ubiquiti airMAX RocketDish™ antenna for

Point-to-Point use or an airMAX Sector antenna for Point-to-MultiPoint use.