User guide

© Bella Barista
Bella Barista, Nene Court, The Embankment, Wellingborough, Northants, NN8 1LD
Tel: [phone] e-mail: [e-mail]
ROCKET ESPRESSO
ROCKET ESPRESSO ROCKET ESPRESSO
ROCKET ESPRESSO -
--
- GIOTTO EVOLUZIONE A CLOSER LOOK
GIOTTO EVOLUZIONE A CLOSER LOOK GIOTTO EVOLUZIONE A CLOSER LOOK
GIOTTO EVOLUZIONE A CLOSER LOOK
Page
Page Page
Page
7
77
7
of
of of
of
15
1515
15
A nice quality metal badge. For a change a
machine with a badge that actually is in
keeping with it’s value. It is even screwed in
place, which means it won’t fall
off.something that occasionally happens
on some espresso machines with constant
exposure to heat and steam.
Readers of past reviews will know that I am
not a fan of cheap badges, especially when
stuck on, or even worse, not level.
Nice quality cold water tank holding almost
3 litres and simply drops in the top, no
tubes to worry about. Refilling can be
done with the tank in or out of the machine
and there is a handy access hatch for filling.
The grab handles make removing a full or
empty tank, much easier.
Nice large cup warming tray. You can get
plenty of cups on there, definitely no lack of
space. The little hatch for refilling means
you don’t have to remove every cup.
Note: I have not removed the protective
plastic film from the cup tray surround as
this will eventually become someone else’s
machine and I will leave them to do this.
The Giotto Evoluzione is heavy, because
the internal frame is rigid and constructed
with a quality (thick) steel. The machine is
difficult to slide around. You will want to
slide it around to refill it if it is under
cupboards.
The feet have been improved from
previous models, but annoyingly, are
still not height adjustable for “levelling
the machine” when using a twin spout
portafilter
Problem solved for a few pounds. Stick 4 of these little felt pads on
the feet and it slides about with one hand!
Alternatively use Teflon “glide pads” and you can slide it around with
1 finger!