User Manual

7.2 Quadcopter Level Calibraon:

After the quadcopter has taken off and landed several times, the quadcopter

gyroscope may become offset. This will cause the quadcopter to always tilt in the

same direction during a ﬂight.

To ﬁx up the recalibration, follow the steps as follows:

i. Turn on the quadcopter and the launch controller, and ensure that the

connection is successful.

ii. Place the quadcopter on a horizontal plane, and enter the quadcopter's OSD

menu (Refer to "OSD Menu Operation").

iii. In the MAIN menu, select CONFIG, then CALI.

iv. Push the direction joystick to the rightto enter level calibration mode. The

quadcopter LED will ﬂash blue.

v. When the OK prompt appears and the LED returns to solid blue, the calibration

is complete. Pilot can exit the OSD menu.

Stage 1 Drone Kit Instruction Manual