User Manual

15
2. Band Button: It is active when the headset is on and has two functions;
• The Short Press (less than 0.5 seconds), increases the current RX channel by 1
and switches back to channel 1 if it is currently on channel 8
• The Long Press (hold for 2 seconds or more) cycles through the RX Bands such
as FS, Race, Band E, Band B, and Band A.
1.
Power Button: It has two functions;
• The Short Press (less than 0.5 seconds), causes the LED to indicate the current
battery life when the headset is turned off.
• The Long Press (hold for 2 seconds or more), causes the device to turn on when
the unit is powered off and turn off when the unit is powered on.
3. Channel Button: It is active when the headset is on and has two functions;
• The Short Press (less than 0.5 seconds), decreases the current RX channel by 1
and switches back to channel 8 if currently on channel 1.
• The Long Press (hold for 2 seconds or more), do an automatic channel scan in
the current band, and will automatically select the channel with the strongest
RX signal.
4. 5-Way Button: It is used for performing different functions in flight mode,
option menu, and DVR playback
Functions in Flight Mode:
•
The short press on the center (Enter button) will start and stop the DVR
recording when in manual DVR mode.
• The long press on the center will enter and exit the options menu.
• The Up/Down on the joystick will adjust the brightness of the display like up will
increase and down will decrease the brightness by 10%.
• The Left/Right on the joystick will adjust the display contrast ratio like up will
increase and down will decrease the brightness by 10%.
Functions in the Options Menu:
• The short press on the center will select the highlighted option.
• The long press on the Center will exit the options menu.
• The Up/Down will navigate the options in the sub-menus.
• The Left/Right will switch between the high-level menu options.
Stage 1 Drone Kit Instruction Manual