Instruction Manual

5
1. Remove the moisture trap (7) and filter cartridge (6) by rotating clockwise.
2. Disassemble the filter cartridge (6) to ensure the buoy is not closed.
3. Reinstall all components, filter cartridge and moisture trap back.
●
How to reset the Prote
TM
protection device
1. Please replace the cartridge when it becomes dirty or color-changing.
2. Please remove the moisture trap (7) by rotating it clockwise.
3. Replace the cartridge by the same way.
●
How to replace cartridge
Troubleshooting
Reason and SolutionProblem
Failed to start
Poor vacuum
●
Loose plug → Reconnect plug to power supply.
●
Wrong voltage → Reconnect to power specified on name plate.
●
Vacuum exists → Release vacuum and restart the pump.
●
Switch is broken → Contact distributor for assistance.
●
Improperly vacuum setting → Adjust the vacuum regulator.
●
Faulty vacuum gauge → Replace a new gauge.
●
Air leakage → Replace or tighten the tubing and accessories that
possible leaks.