Specifications

Chapter 5. The Main Menu 41
player back to initial configuration. The details of this menu are covered in section 13.3
(page 157).
5.8. Recording
5.8.1. While Recording Screen
Figure 5.3.: The while recording screen
Selecting the Recording option in the Main Menu enters the Recording Screen,
whilst pressing Long Select enters the Recording Settings (see section 10 (page 76)).
The Recording Screen shows the time elapsed and the size of the file being recorded.
A peak meter is present to allow you set gain correctly. There is also a volume setting,
this will only affect the output level of the player and does not affect the recorded sound.
If enabled in the peak meter settings, a counter in front of the peak meters shows the
number of times the clip indicator was activated during recording. The counter is reset
to zero when starting a new recording.
The frequency and channels settings are shown in the status bar.
The controls for this screen are:
Key Action
Submenu / Play Select setting.
Left / Right Adjust selected setting.
Select Start recording.
While recording: pause recording (press
again to continue).
Power Exit Recording Screen.
While recording: Stop recording.
Long Submenu Open Recording Settings (see sec-
tion 10 (page 76)).
The Rockbox manual (version rUnversioned directory-150516) Sansa Clip+