Smart Wireless Camera Model No.
Contents 1. In the box------------------------------------------01 2. Product overview------------------------------ 02 3. Product specification------------------------- 04 4. Charge the camera----------------------------- 04 5. Set up the camera-------------------------------- 05 6. Install the camera-------------------------------- 08 7. Share the camera ------------------------------ 11 8. Firmware upgrade --------------------------- 14 9. FAQ--------------------------------------------- 14 10.
Thank you for choosing rock space! Please read over this User Manual before using your camera. If you have any questions or concerns, please visit https://rockspaceworld.com or contact us at service@rockhomelife.com to find help and more information. In the box 1. Camera*1 2. Bracket*1 3. Mounting kit*1 4. Screw for bracket*1 5. USB charging cable*1 6.
Product overview Wi-Fi antenna Lens Infrared lamp White light MIC Infrared human body sensor Indicator light Blue Off Working mode Sleep mode Yellow Charging mode Green Fully charged mode 02
Micro-USB port Speaker Micro-SD card slot Reboot hole Power button 03
Item Field of view Horizontal: 96° Vertical: 56° Diagonal: 128° Video bitrate Adaptive Rotation angle Horizontal: 355°, vertical: 90° Image resolution Storage media Max. 1920 X 1080 Micro SD card (Up to 128GB) Battery capacity 9000mAh Size (without bracket) 120.2×101.1×158.3 (mm) Adapter requirement 5V/1.5A Charge the camera Before you mount the camera on a wall or ceiling, make sure your camera is fully charged. When in use, the rockhome app will remind you when the battery is low.
Set up the camera The camera supports battery-powered supply and AC-powered supply. 1. Download rockhome All the functions can be performed using the rockhome app. Get the app from the App Store or Google Play, or scan the QR code below to download directly. or Get it on Google Play Download on the App Store Scan for rockhome 2. Log in Open the app, and log in. If you don't have an account, follow the on-screen instructions to create one. 3.
4. Add the camera Click Add Camera Now in the rockhome app and follow app instructions to configure your camera and add it to your network. Note: To ensure a long distance connection, the camera only supports 2.4 GHz Wi-Fi with stronger wall penetration capability and does not support enterprise Wi-Fi. Please ensure that the connected Wi-Fi meets the requirements.
Troubleshooting: When you hear the "Wi-Fi Password Error", please check whether the Wi-Fi password you entered in the rockhome app is correct; When you hear the "Authentication error", please ensure that your Wi-Fi network is not an enterprise network, and the camera supports only the network with a security level below WPA-2; When you hear the "Wi-Fi not found", please check whether you select or enter the correct Wi-Fi name, and place the camera near the Wi-Fi router and ensure that the router is power
Install the camera You can simply place the camera on a horizontal surface like a shelf, or you can mount it on a wall or ceiling. (1) Select a good spot Select a good spot for your camera, place or install the camera in a position where its view is not blocked and ensure that it is within the coverage of your Wi-Fi network. Note: Check your camera's video stream with the rockhome app.
Recommended height about 6 ft For outdoor use, please install the camera upside down to maximize the waterproof performance and the infrared human body sensor's effectivity. (2) Install the bracket Hold the bracket up where you want to mount your camera and screw it in. Note: When drilling holes, drill only one to start with. Drill the other three holes using the slots as a guide.
(3) Fix the camera Put your camera upside down, attach it to the bracket, and fix the camera with the screw included.
Share the camera The one who set and configured the camera is the administrator. If you are the camera's administrator, you can share the camera with up to 50 members at no extra cost. Members can access live stream and playback, and talk to people near the camera. To share the camera: (1) Find the camera you want to share on rockhome homepage or camere setting page. Tap the share button.
2) Tap Camera sharing, a QR code will be generated for sharing.
(3) For family members or friends you want to share, go to the rockhome app, tap Add friend's camera on the homepage, then scan the QR code. abcc@gmail.com (4) The administrator will receive a request after the member scans the QR code, tap Accept. Now the member can view the camera's stream in their own apps.
Firmware upgrade When you connect your camera through the rockhome app, it will prompt you if the latest firmware is available. You can also manually check the firmware upgrade in the settings of the app. Please make sure that your camera is fully charged or connected to the power adapter before upgrading the firmware. Do not cut off the power supply during the upgrade.
Q3: Will the camera show red lights when night vision is activated? A: The built-in infrared lamp beads make the camera only show some dim red lights when night vision is activated, but the image quality is still clear in low light or in total darkness. Q4: What are the requirements for Wi-Fi? A: Please use a 2.4GHz wireless network. The device does not support the 5GHz wireless network. Meanwhile, please set the Wi-Fi authentication method to WPA2-PSK or other lower level of the security method.
Q8: How rock space cameras store recorded videos? A: App storage: the rockhome app offers a 7-day (≤1GB) free app storage service. As long as there is a network connection, video clips will be recorded and uploaded to the rockhome app automatically. With a cloud service subscription, you can view recordings for up to 60 days, depending on your plan. SD card storage: You can also use an SD card for storage.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
V1.
