Owner's manual

ManualsBrandsRock-Slide Engineering ManualsCarRIGID SERIES FRONT BUMPER

INSTALLATION INSTRUCTION RSEI 100

RIGID SERIES FRONT BUMPER

FB-F-100-JK, FB-F-101-JK, FB-F-102-JK, FB-F-103-JK

FB-S-100-JK, FB-S-101-JK, FB-S-102-JK, FB-S-103-JK

(JKA part number denotes Aluminum products)

Vacuum Canister Relocation Bracket required for years 2010-

2014. Relocation Brackets can be purchased through R-SE

(part # AC-CRL-100)

Summary of content (4 pages)

PAGE 1
RIGID SERIES FRONT BUMPER FB-F-100-JK, FB-F-101-JK, FB-F-102-JK, FB-F-103-JK FB-S-100-JK, FB-S-101-JK, FB-S-102-JK, FB-S-103-JK (JKA part number denotes Aluminum products) Vacuum Canister Relocation Bracket required for years 20102014.
PAGE 2
PARTS LIST QTY 1 2 2 2 2 4 8 10 18 DESCRIPTION Front Bumper Light Bracket (L-Brackets) 5/16''x1'' Bolts 5/16'' Locking Nuts 4.5''x7/16'' Bolts 5/16'' Washers 7/16''x1'' Bolts 7/16'' Nuts 7/16'' Washers *Optional: Bull Bar *If you have purchased a bumper without a bull bar (FB-F-101-JK, FB-F-102JK, FB-S-101-JK, FB-S-102-JK) you will only need 4 7/16’’x1’’ bolts and 4 7/16’’ washers.
PAGE 3
RIGID SERIES FRONT BUMPER INSTALLATION **WARNING: MUST READ** DO NOT REMOVE FRONT BUMPER UNTIL YOU HAVE DISCONNECTED THE LIGHT WIRE HARNESS AND LIGHTS. FAILURE TO DO SO CAN RUIN YOUR TRACTION CONTROL SYSTEM. 1. After you have disconnected the light wire harness and lights, remove the stock plastic bumper and skid plate. Installing with winch 1. Mount the winch on the bumper before mounting the bumper onto the Jeep. a. Use the hardware provided with the winch to secure it to the bumper 2.
PAGE 4
LIGHTS For wiring you can use the stock light harness and use the stock light switch or you can follow the directions that came with the lights to hook up to the battery directly and use the switch they provide. To mount the light, use the following. a. 2 Light brackets (L-Brackets), 2 5/16’’x1’’ bolts, 2 5/16’’ locking nuts Lights R-SE has used: PIAA 520 / HELLA 500FF Thank you for choosing Rock-Slide Engineering products. We value your business and welcome your feedback/suggestions.