Manual

AMMUNITION

This firearm is chambered for cartridge in the round nose

configuration (Note: Use of wadcutter may require extra

adjustment of the barrel feed ramp by a competent gunsmith).

Use factory loaded cartridges manufactured in accordance with

industry standards. Always examine your ammo particularly on

and around the primer before loading the magazine.

Look for dents, scratches, improper crimping, loose case mouths

and other signs of damage.

Do not load live ammunition into your firearm until you are

ready to use it. Keep the muzzle pointing in a safe direction, well

clear of your body when loading and unloading.

LOADING THE MAGAZINE: Grasp magazine in one hand and

place a round on the magazine follower with the base of shell first

and push down. Let the cartidge slide under the feed lips until

base of cartridge touches the flat edge of the magazine. Place next

round on top of previous round, press down again and into back.

Repeat until the magazine is loaded to its rated capacity. Do not

exceed capacity.