Manual

BASIC MAINTENANCE OF YOUR FIREARM
Clean your firearm after firing:
Remove the barrel and slide assembly from frame.
Use a bore brush dipped in a gun cleaning solvent to scrub barrel
bore and chamber and remove all lead residue.
Clean the slide's breech face area. Use an old toothbrush with
solvent to remove residue from powder and primers.
~
Also clean the insides of the slide and barrel locking lugs, frame
and slide rails, extractor & firing pin.
After brushing, clean up with a clean dry cloth and wipe all parts
.
and surfaces clean of solvent. Immediately apply some gun oil to
preserve and lubricate the moving parts.
If you are going to store your firearm for an indefinite period of
time, apply a thicker film of oil with a lubricant that is acid-free.
Coat the external parts and surfaces with anti-rust oil or gun
grease to prevent rusting. To use firearm again from this condition,
clean thoroughly and wipe dry again. Check all functions before
loading. Moisture and humidity are factors that cause rust and
corrOSIOn.
~
Store your firearm in very dry conditions with very low humidity.
Avoid leather as this holds moisture. Oil coated plastic bags are
better.
5
ROCK ISLAND AlUleBY PISTOLS
are assembled by:
TWIN PINES, INC.
Manila,Philippines
15