64mm Fan F-16 V2 Manual

1. Glue the air speed head on the nose cone. Ensure the air speed head and nose cone are in perfect

alignment (fig1).

2. Apply the nose cone to the front fuselage as diagram shows. Ensure the nose cone is on the correct side

(fig2).

3. Install the fins into place with glue, the higher side towards the front of the plane (fig3).

Note: the fin will angle towards the outboard of the plane as picture shows (fig4).

Horizontal Tail Installation

fig2

Required Adhesives:

Medium CA

HIGHER

fig1

fig2

fig3 fig4