User manual

17
DISPLAY CODE
EXPLANATION
DISPLAY CODE
EXPLANATION
Screen messages
Blood glucose
may be higher
than the
measuring
range of the
system.
Blood glucose
may be lower
than the
measuring
range of the
system.
This test result
was flagged.
Blood glucose
is below the
defined hypo
(low blood
glucose) level.
The test strips will expire at the end of the month.
Before the end of the month, insert a new code chip
from a new box of test strips and ensure the code
chip number matches the code number on the test
strip container. Make sure the time and date in the
meter are correct.
The meter is not
coded or the
code chip is not
inserted. Turn
off the meter
and recode it.
Never make treatment
decisions based on an
error message. If you
have any concerns, call
Roche Diagnostics.
The meter will not turn on or the display is blank.
• Battery is dead – Insert new battery
• Display is damaged – Call Roche Diagnostics
• Meter is defective – Call Roche Diagnostics
• Extreme temperatures – move the meter to a
more temperate area
Battery power
is low.
Change the
battery soon.
The meter is in
set-up mode,
waiting for
you to change
or confirm
settings.
The meter is
ready for a
drop of
blood or
control
solution.
The meter is
ready for you
to insert a
test strip.